Items (0)
0
Shopping Cart
Epifanes bi-component polyurethane varnish shiny finish
Reference
VM/EPI/PU/BRI
€82.99
By buying this product you can collect up to 8 points. Your cart will total 8 points that can be converted into a voucher of €4.00.
Tax included
Epifanes bi-component polyurethan varnish with a matt finish, based on saturated polyester resine.
This varnish is very resistant to bad weather conditions, to UV and to water abrasion. Can be applied on existant polyurethan varnish or untreated wood (for example marina plywood). May be used as primer in a mono-component system, as protection layer or between a resine expoxy system.
Internal or external application above the waterline.
Temperature must be between 15°C and 27°C.
Température d’application : comprise entre 15°C. et 27°C.
Diluant brush-application brosse : Epifanes diluant PU brush. No need for sanding if recovered beneath 72h.
Recoverable after 24 hours at 18°C (65°F).
VM/EPI/PU/BRI
Data sheet
- Packing
- 0.75L
- Properties
- Covering capacity of 9m²/pot
- Use precaution
- Recoatable after 24 hours at 18°C.
- Hue
- Glossy
Download
Download (1)
You might also like
Epifanes bi-component polyurethan varnish with a matt finish, based on saturated polyester resine.
This varnish is very resistant to bad weather conditions, to UV and to water abrasion. Can be applied on existant polyurethan varnish or untreated wood (for example marina plywood). May be used as primer in a mono-component system, as protection layer or between a resine expoxy system.
Internal or external application above the waterline.
Temperature must be between 15°C and 27°C.
Température d’application : comprise entre 15°C. et 27°C.
Diluant brush-application brosse : Epifanes diluant PU brush. No need for sanding if recovered beneath 72h.
Recoverable after 24 hours at 18°C (65°F).