Clamps and fittings

Bronze mast band for mast, bowsprit and boom. Setting with two eyes for the attachment of rigging. Available in several diameters. 

Undrilled, hand polished molded bronze.

Bronze mast band for mast, bowsprit and boom. Setting with four eyes for the attachment of rigging. Available in several diameters.

Undrilled, hand polished molded bronze.

Chandlery made in England.  

Bronze shroud or bowsprit plate, undrilled.

Available in several diameters. 

Chandlery made in England. 

Bronze shroud or bowsprit plate to screw on the boat hull, not drilled.

Helps passing the breasthook and bobstay for a better maintenance of the bowsprit.

Available in several lengths.

Chandlery made in England. 

Brass shroud or bowsprit plate not drilled to screw on the boat hull.

Helps passing the breasthook and bobstay for a better maintenance of the bowsprit.

Other sizes available.

Bronze gooseneck to connect the furler boom with his mast and helping its horizontal and vertical orientation.

Gooseneck dedicate to mast diameters 62 mm, 75 mm and 87 mm.

Chandlery made in England.

Bronze clew boom end fitting with a double swivel tang for use with roller reefing in diameter 50 mm.

Also available: tack boom and reefing claw.

Chandlery made in England

Bronze tack boom end fitting with a square hole for use with roller reefing in diameter 50 mm.

Also available : Roller boom reefing cnd reefing claw.

Chandlery made in England.

Bronze reefing claw to clamp the boom for the attachment of the mainsail tackle. Provided with 4 tufnol rolls to avoid any friction and for a better slide. 

Available in diameters 100 mm and 125 mm.

Chandlery made in England.

Classic bronze gunmetal mast-fitting set for round masts and round, oval, or square booms. Ironwork and links included.
This gooseneck is made to measure according to your dimensions from high-quality marine bronze.
You cand send the diameter of your mast and boom by mail and you'll get the quotation and delivy date within 48 hours.

Chandlery made in England.

Lightweight stemhead fitting to hang on the stay that maintains the frontsail (gennaker, staysail...). 

Length bowline bridle : 65mm.

Chandlery made in England.

Tiller fitting in gunmetal to govern small size sailing boats. 

As the the rudder stock is directly connected to the drop rudder, you'll have a better sensation.

Chandlery made in England.

220 x 40 mm tiller lock fixed on 80 x 45 mm deck hinge and supplied with a 20 x 20 mm pin. 

The "comb fitting", made from brushed brass, is used to lock the tiller at differents positions.

You can folded down this tiller stop when you don't use it.

Realization with the order, count 15 days of delays.

Solid bronze cast fitting for traditional gallows frames.

This mast-fitting is inclined of about 30° and after having built the cross with both wooden parts, you can place the mast while your ship is anchored.

Sold individually, but for an optimal use, you need 2 of them.

Mast traveller in galvanized steel to maintain the halyard along the spar.

Diameters available: 50mm, 70mm, 90mm, 110mm, 130mm.

Galvanized steel tackle hooks for various applications on board.

Chadlery available in length 80mm up to 120mm.

Other dimensions on demand only.

remaining quantity: 1 in 80mm and 1 in 120mm

Bronze gaff span shackle mostly used on fore-and-aft sails. 

Galvanized steel gaff span shackle mostly used on fore-and-aft sails. 

Chandlery made in England. 

Available: 1 piece