Ropework

Seamaship kit for topman package in a leather sheath containing:

• 1 rigging knife with rosewood Handle of 100mm and Stainless Steel blade 90 mm long,
• 1 cast shackler spike with splicing groove,
• 1 combination pliers 160 mm long.

It is practical for any sailor, this kit will allow the sailor to be effective during his ropework.

Highly durable gabier's knife with a solid and ergonomic wooden handle.

It consists of a 140mm thick stainless steel blade.

Yachtsman's knike multifunction with blade, cast marlin spike and shackle unlocker in Stainless Steel.

Packed with sliding knot cotton lanyard.

You can use it aboard yachts, dinghies, ships and life-rafts.

Sailmaker awl 4mm with yellow plastic handle for piercing leather, sails or other thick materials.  

Length : 112mm.

Marlin spike in stainless steel with hole, length 165mm.  

Swedish hollow spike in stainless steel with wooden handle for wire and thick-rope splicing.

Speedy stitcher and hand sewing awl in wood with two needles and 20m of coarse waxed polyester thread.

It makes unter and top threads from a single spool.

Patented tool for small sewing and repair work, even with thick leather and heavy sailcloth. 

3 needles for speedy stitcher, a manual tool for small sewing on sails, leather and any other thick piece. 

Short, long and curved. 

Spool for speedy stitcher (without thread) in stainless steel. 

Spool 160m of coarse waxed polyester thread for speedy stitcher (thin or thick). 

Polyester braided, waxed hand sewing thread in white, red, beige or black. Thickness 1mm. Good elasticity for a solid rope finish.
Sold by roll of 55m or 110m.  

Ideal scissors for cutting technical ropes (Dyneema, Kevlar or Vectran) preventing fibers from penetrating between the blades.

Set of sailmaker and saddlery needles in forged steel for extra strength (triangular section). 

The bigger the dimension number, the smaller the needle. 

Sold by set of 5 or 20 needls.

Set of 4 hollow polished stainless steel needles Selma that make it easy to make a simple splice on modern rope. They are ideal for rope 4 to 10mm. Very robust product. An illustrated manual is provided.

Sailmaker and saddlery needle in forged steel for extra strength (triangular section). 

The bigger the dimension number, the smaller the needle. 

Sold by unit. 

Long-eye seamanship needle, with fixed plastic handle, for splicing 4 to 6mm rope. Length 26 cm.

The long-eyed needle is used in reverse to hollow needles. You have to slip the needle through the rope and go up to the end of the rope to then wedge it between the two rods and finally, pull the needle back.

Sold individually.

Sailmaker palm in flexible leather with lace. Needle plate in steel. 
 

Available in 3 versions :

Palm in flexible leather for small handcraft (yellow ochre). 

Palm strengthened with thick resined leather (beige). 

Professional palm in ultra-thick leather (black).

Sailmaker palm with lace, strenthened with thick, resined leather. Needle plate in steel. 
 

Available in 3 versions :

Palm in flexible leather for small handcraft (yellow ochre). 

Palm strengthened with thick resined leather (beige). 

Professional palm in ultra-thick leather (black).

Professional sailmaker palm in ultra thick leather. Needle plate in steel. 
 

Available in 3 versions :

Palm in flexible leather for small handcraft (yellow ochre). 

Palm strengthened with thick resined leather (beige). 

Professional palm in ultra-thick leather (black).

Swivel bench hook in hardened stainless steel. Helps keeping taugh every sail tissue while you're hand-sewing. Belongs on every sailmaker's sewing work bench.
Length: 100 mm.

Black tuna line heat soaked with bitumen for a very hight resistance and breaking load. Main use for longline fishing, rigging or protecting. Sold per m or spool of 100m.

Made in France. 

Couteau farol : l'original Encan dans la version bois padouk. 

La lame forgée en acier suédois possède une très bonne coupe, le manche en bois est agréable au toucher et l'ensemble est surprenant de légèreté grâce au système de verrouillage original très simple inventé par Farol. 

Couteau Farol : le gréeur en wengé. 

Ce couteau a la particularité d'être un couteau à lame forte maintenue par un manche épousant la paume de la main, mais également un épissoir robuste comportant un démanilleur et un chas d'aiguille pour transfiler.

Slim universal rigging knife with blade from hardened carbon steel and brass-riveted rosewood handle. Teeth on the back of the blade are used to scale fish.
This boatwork knife is stored in a leather sheath, sewn and riveted flat. It can also be hooked to the belt thanks to the passer provided behind the strap.

Sailmaker awl with stainless steel 3mm tip and wooden handle.

Perfect for drilling thick materials such as leather.

Total length: 98mm

Ideal scissors for cutting technical ropes (Dyneema, Kevlar or Vectran) preventing fibers from penetrating between the blades.