Epoxy resin

Syringe of fast-setting epoxy (12ml base, 12ml hardener) for all type of hight-resistant sticking. 

Press the back part, mix and apply.

West System 105/206 Epoxy resin composed of a 5kg base + 1kg hardener with slow setting (catalyzes in 9 to 12 hours at 21°C) and low viscosity.

It is suitable for fiberglass, wood, aluminum and steel boats. It is recommended not to apply it below 16°C.

Pot life at 25 ° C for 20 to 30 minutes.

Proportions: 5 parts of resin for 1 part of hardener

Hard at surface at 21°C in 9 to 12 hours and hard on the core with maximum resistance (at 21°C) in 5 to 7 days.

West System Epoxy resin base (105) + quck hardener (205).

205 hardener is used for quick hardening.

The mixture catalyzes in 10 minutes and becomes ultra resistant.

You can add additives or fillers to make fillets (additives 406) or plaster (additives 407).

5/1 proportion

Hard on the surface (at 21 ° C) in 5 to 7 hours, and hard on the core (at 21 ° C) in 5 to 7 days.

Minimum working temperature of 5 ° C not to be exceeded.

West System 105/206 Epoxy resin composed of a base and hardener with slow setting (catalyzes in 5 to 7 hours at 21°C) and low viscosity.

It is suitable for fiberglass, wood, aluminum and steel boats. It is recommended not to apply it below 16°C.

Bucket life at 25°C: 10 to 15 minutes.

Proportions: 5 parts of resin for 1 part of hardener

Hard at surface at 21°C in 5 to 7 hours and hard on the core with maximum resistance (at 21°C) in 5 to 7 days.

Small Epoxy resin pack by West System 105/205, for small repairs on fiberglass, wood, aluminum and steel boats.

205 hardener is recommended for quick hardening.

It is compatible on fiberglass, wood, aluminum and steel boats.

You can add additives (supplied) to make fillets (403) or plaster (407).

Content of the pack:

resin 105 (250gr),

fast hardener 205 (50gr),

additive 403 (thickener) and 407 (low density filler),

3 graduated containers,

2 syringes,

2 pairs of gloves.

WEST SYSTEM filler for epoxy with colloidal silica of 60gr

Strong thickening additive to mix with your epoxy resins. It is generally used to manage viscosity and thus prevent run-off during gluing, filling of voids and fillets.

It creates a harder and smoother mixture and is very versatile.

405 contains a mix of cellulose fibres and other fillers for use in filleting applications. His tan color give a naturally finished.
Alchohol or waterbased stains may be added to adjust the colour.
Add 15% to 25% by weight to the epoxy mix.
Colour: tan.

Multipurpose fiberglass in a roll 10 meters long and 2.5cm wide.

Perfect for reinforcing a structural element with epoxy on your boat.

It will provide greater abrasion resistance and reduce the risk of microcracks.

800ml reusable graduated jar for epoxy mixing.

Once the epoxy has solidified, it will peel off easily.

Pack of 2 empty reusable syringes of 10ml for small precise collages with epoxy for example.